smartctl version 5.22 Copyright (C) 2002-3 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: IBM-DJSA-220 Serial Number: 44V442K0774 Firmware Version: JS4OAC0A Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 5 ATA Standard is: ATA/ATAPI-5 T13 1321D revision 1 Local Time is: Mon Dec 15 15:05:03 2003 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled The SMART RETURN STATUS return value (smartmontools -H option/Directive) can not be retrieved with this version of ATAng, please do not rely on this value === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 650) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 29) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 040 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 110 110 033 Pre-fail Always - 1 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 1079 5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0 7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 040 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 067 067 000 Old_age Always - 14693 10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 541 191 G-Sense_Error_Rate 0x000a 099 099 000 Old_age Always - 2 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 3 193 Load_Cycle_Count 0x0012 072 072 050 Old_age Always - 287754 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 6 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Timestamp = decimal seconds since the previous disk power-on. Note: timestamp "wraps" after 2^32 msec = 49.710 days. Error 6 occurred at disk power-on lifetime: 14652 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 b6 e4 9e e1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c4 ff 01 40 00 00 e0 00 22.600 READ MULTIPLE c4 ff 01 00 00 00 e0 00 22.600 READ MULTIPLE c4 ff 07 98 01 06 e0 00 22.600 READ MULTIPLE c4 ff 19 7f 01 06 e0 00 22.600 READ MULTIPLE c4 ff 04 3b 01 00 e0 00 22.600 READ MULTIPLE Error 5 occurred at disk power-on lifetime: 14615 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 00 fb 57 99 e1 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c4 ff 07 e7 c4 07 e0 04 23.200 READ MULTIPLE c4 ff 08 df c4 07 e0 04 23.200 READ MULTIPLE c4 ff 08 7f 17 07 e0 00 23.200 READ MULTIPLE c4 ff 08 d7 c4 07 e0 00 23.200 READ MULTIPLE c4 ff 08 cf c4 07 e0 04 23.200 READ MULTIPLE Error 4 occurred at disk power-on lifetime: 5 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 59 01 11 96 a3 e2 Error: IDNF Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- c8 ff 01 9a 13 fa e0 00 3036.400 READ DMA c8 ff 01 99 13 fa e0 00 3036.400 READ DMA c8 ff 01 98 13 fa e0 00 3036.400 READ DMA c8 ff 01 97 13 fa e0 00 3036.400 READ DMA c8 ff 01 96 13 fa e0 00 3036.400 READ DMA Error 3 occurred at disk power-on lifetime: 5 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 11 96 a3 e2 Error: IDNF Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- 20 ff 01 11 96 a3 e2 00 2858.100 READ SECTOR(S) 20 ff 01 3f 00 00 e0 00 2858.100 READ SECTOR(S) 20 ff 01 00 00 00 e0 00 2858.100 READ SECTOR(S) 20 ff 01 00 00 00 e0 00 2858.000 READ SECTOR(S) e3 03 00 ff 4f c2 e0 02 2858.000 IDLE Error 2 occurred at disk power-on lifetime: 4 hours When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 10 51 01 11 96 a3 e2 Error: IDNF Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Timestamp Command/Feature_Name -- -- -- -- -- -- -- -- --------- -------------------- 20 ff 01 11 96 a3 e2 00 479.700 READ SECTOR(S) 20 ff 01 3f 00 00 e0 00 479.700 READ SECTOR(S) 20 ff 01 00 00 00 e0 00 479.700 READ SECTOR(S) 20 ff 01 00 00 00 e0 00 479.700 READ SECTOR(S) e3 03 00 ff 4f c2 e0 02 479.700 IDLE SMART Self-test log structure revision number 1 No self-tests have been logged. [Use the smartctl -t option to run these.]